ON SALE - Gold Rush Skeleton Mechanical Pocket Watch

Size Guide

This intriguing timepiece features a glowing gold finish that plays off of the crystal face and gleaming silver inner mechanism. It is truly mesmerizing to watch the ingenious mechanism move. Marked stations serve as number and a matching gold chain is included and can be clipped inside the pocket for security. Very steampunk vintage. A perfect accessory for the groom and groomsmen. Makes a great accessory for historic costumes. 

A mechanical watch is a watch that uses a non-electric/electronic mechanism to measure the passage of time.  They are driven by a spring which must be wound periodically, and releases the energy to activate the balance wheel, which oscillates back and forth thanks to the balance spring at a constant rate, transmitting the impulse through the lever escapement to the gear train, that divide the impulse into hours, minutes and seconds, thus making 'ticking' sound when operating.  Mechanical watches evolved in Europe in the 1600s from spring powered clocks, which appeared in the 1400s.

Material: High Polished Gold Plating over Stainless Steel

Diameter: 4.5 cm (1.75 inches)
Thickness: 1.4 cm
Total Length of Chain: 30cm (13 inches)

Operating Instructions:
The watch opens by pressing down on the crown knob. Pressing the crown a second time will open the back door. To set the time, pull the crown all the way out (or second indent) to adjust the minute and hour hands to the appropriate time. Push the crown all the way back in to start the movement and begin normal timekeeping.

1. Please peel all films off before wearing. 2. Please keep the watch away from magnet to avoid making the watch stop working. 3. Power by shaking the watch manually. 4. Fully wound, the watch can function for up to 24 hours. 5. If you wear it more than 10 hours per day, extra winding up will not be necessary. 6. This watch runs on kinetic energy and movement is part of what keeps it working.

(Reg 95)


Ring Sizing Chart
Ring sizes listed are in US sizing standards. If you do not know your ring size we suggest the following: 1 - Get a non-stretchy string or paper about 6" long and 1/4" wide. 2 - Wrap around the base of your finger. It has to fit snug, but not too tight, it needs to be comfortable to wear. 3 - Mark the point on the string/paper where it overlaps forming a circle. 4 - Lay the paper/string out on a ruler to determine the measurement. Ring finger measuring tips: Make sure your finger is at a normal body temperature as fingers can shrink or expand when cold or hot. If your knuckle is much larger than your finger’s base, take two separate measurements and choose a size in between. You want a ring to fit over your knuckle, but not be too loose or it will shift around. If you know your ring size in international standards we can convert to US standard using the conversion chart found here We can compare your measurements to the actual ring to ensure fit.